QualTech Industries, Inc. - MULTI-FUNCTIONAL - QualTech Industries, Inc.

Main menu:

___________________________________________________________________________________________________________________

OKUMA VTM-120YB

THIS MACHINE IS A FIVE-AXIS VTM WITH 63" TURNING CAPABILITIES. IT IS A VERTICAL LATHE AND MACHINING CENTER WITH FULL MILLING CAPABILITIES AT VERTICAL, HORIZONTAL, AND ALL ANGLES IN BETWEEN. ITS CAPABILITIES ALSO INCLUDE SIMULTANEOUS MILLING WITH THE CHUCKING C-AXIS. THE VTM-120YB'S VERSATILITY ALLOWS FOR REDUCED SETUPS, BETTER ACCURACY, AND DRAMATICALLY REDUCED CYCLE TIMES DUE TO THE ABILITY TO MACHINE 5 SIDES OF A PART IN ONE SETUP.

__________________________________________________________

CONTROL: FANUC 18I-TB

MAX CUTTING DIAMETER: 63" (1,600 MM)

MAX CUTTING LENGTH: 42.5" (1,080 MM)

X AXIS TRAVEL: 50" (1,270 MM)

Y-AXIS TRAVEL: 48.8" (1,240 MM)

Z-AXIS TRAVEL: 42.5" (1,080 MM)

B-AXIS TRAVEL: 90 DEGREES

C-AXIS TRAVEL: 360 DEGREES @ 0.001 DEGREE INCREMENTS

LATHE SPINDLE SPEED: 600 RPM

MILLING SPINDLE SPEED: 4,000 RPM

RAPID TRAVERSE: 630 IPM (16,000 MM/MIN)

CUTTING FEEDRATE: 236 IMP (6,000 MM/MIN)

AUTOMATIC TOOL CHANGER CAPACITY: 60 TOOLS

___________________________________________________________________________________________________________________

OKUMA VTM-100

THIS MACHINE IS A HEAVY DUTY VERTICAL LATHE WITH TURNING CAPABILITIES OF 40" IN DIAMETER AND 40" IN LENGTH. IT HAS AN AUTOMATIC TOOL CHANGER WITH A CAPACITY OF 60 TOOLS. ITS CAPABILITIES ALSO INCLUDE BIG PLUS CAT50 SIMULTANEOUS MILLING WITH THE CHUCKING C-AXIS.

__________________________________________________________

CONTROL: OKUMA OSP P200L

MAX CUTTING DIAMETER: 40" (1,000 MM)

MAX CUTTING LENGTH: 40" (1,000 MM)

X AXIS TRAVEL: 25.59" (650 MM)

Z-AXIS TRAVEL: 33.07" (840 MM)

C-AXIS TRAVEL: 360 DEGREES @ 0.001 DEGREE INCREMENTS

LATHE SPINDLE SPEED: 1,250 RPM

MILLING SPINDLE SPEED: 4,500 RPM

RAPID TRAVERSE: 709 IPM (18,000 MM/MIN)

AUTOMATIC TOOL CHANGER CAPACITY: 60 TOOLS

___________________________________________________________________________________________________________________

HONOR SEIKI VL-125CM

THIS MACHINE IS A LARGE HEAVY DUTY VERTICAL LATHE WITH TURNING CAPABILITIES OF 63" IN DIAMETER AND 50" IN LENGTH. IT ALSO HAS A RAM WITH 35" OF TRAVEL AND HEAVY DUTY CAT50 MILLING CAPABILITIES. ITS CAPABILITIES ALSO INCLUDES SIMULTANEOUS CAT50 MILLING WITH THE CHUCKING C-AXIS.

__________________________________________________________

CONTROL: FANUC 18I-TB

MAX CUTTING DIAMETER: 63" (1,600 MM)

MAX CUTTING LENGTH: 50" (1,270 MM)

X AXIS TRAVEL: 46" (1,170 MM)

Z-AXIS TRAVEL: 66.5" (1,690 MM)

B-AXIS TRAVEL: 90 DEGREES

C-AXIS TRAVEL: 360 DEGREES @ 0.0001 DEGREE INCREMENTS

LATHE SPINDLE SPEED: 300 RPM

MILLING SPINDLE SPEED: 2,250 RPM

RAPID TRAVERSE: 393 IPM (16,000 MM/MIN)

AUTOMATIC TOOL CHANGER CAPACITY: 16 TOOLS